XL_e4P_Mix
세부 정보
파일 다운로드
모델 설명
ebara_pony_3에 대해 개인적인 해석으로 병합하고 미세한 조정을 가했습니다.
제가 개인적으로 ebara_pony_3와 병합하고 약간의 수정을 가했습니다.
눈은 쉽게 왜곡되기 쉽다고 생각합니다(샘플에서는 ADetailer를 사용했습니다).
※score 태그, source 태그를 사용할 때는 긍정/부정 모두 적당히 그리고 저강도로 제한해야 자글(jaggy) 현상이 발생할 수 있습니다(적당히 그리고 저강도라면 문제없습니다).
눈은 쉽게 왜곡되기 쉽습니다(샘플에서는 ADetailer를 사용했습니다).
※score 및 source 태그를 사용할 때는 긍정 또는 부정 프롬프트 모두에서 강도를 낮추고 적은 양만 사용해야 합니다. 그렇지 않으면 출력이 자글(jaggy)할 수 있습니다(적은 양과 저강도로 사용하면 문제없습니다).
- 샘플에 사용된 품질 프롬프트/Quality prompt used for the sample
(masterpiece:0.7), (best quality:1.1),
- 샘플에 사용된 네거티브 프롬프트/Negative prompt used for the sample
(worst quality:0.8), (low quality:1.1), simple background, bad anatomy, error, (mangled fingers:1.05), (bad hands:0.9), (2.5D:0.6), (light particles:0.7), narrow waist, (muscular:0.7), (ribs:0.9), symbol-shaped pupils,
※먼지처럼 보이는 light particles는 masterpiece에 반응하여 자주 나타납니다. 경우에 따라 네거티브 프롬프트의 light particles 강도를 조정하는 것이 좋습니다.
※먼지처럼 보이는 light particles는 "masterpiece"에 반응하여 자주 나타납니다. 경우에 따라 네거티브 프롬프트의 light particles 강도를 조정하는 것이 도움이 될 수 있습니다.
- 샘플에 사용된 출력 설정/Output settings used for the sample
Euler a (simple)
steps:28
CFG:7
ENSD:31337
Clip Skip:2
Random number generator source:GPU
(RTX 3000 시리즈를 사용하므로 RXT 4000 시리즈 또는 2000 시리즈와 결과가 다를 수 있습니다/Since I use the RTX 3000 series, the results may vary compared to the RTX 4000 series or RTX 2000 series)
Emphasis mode:no norm
- 샘플 출력 환경/Sample output environment
reForge
- 병합 방식/Merging Recipes
ebara_pony_3 x (1-alpha) + 4thTailAnimeHentai_v045 x alpha (0.25,0,0.5,0.25,0.25,0.25,0.25,0.25,0.25,0,0.75,0,0,0,0.75,0,0,0.75,0.75,0) = A
A x (1-alpha) + PerillaniumCCM_PONY x alpha (0,0,0,0,0,0,0,0,0,0.25,0,0.25,0.25,0.25,0,0.75,0.75,0,0,0) = XL_e4P_Mix
SDXL 표준 VAE의 fp16(수정 버전)을 포함했습니다/I have embedded the fp16 (fixed version) of the standard SDXL VAE
ebara_pony_3
https://huggingface.co/tsukihara/xl_model
4thTailAnimeHentai_v045
PerillaniumCCM_PONY
https://huggingface.co/Hexloop/PerillaniumCCM
이 모델의 제작자분들께 감사드립니다.
I am grateful to the creators of these models.
추기: 9월 7일부터 ebara 시리즈 모델은 제작자로부터 제공되지 않습니다.
Note: As of September 7, the Ebara series models are no longer available from the creator.
라이선스는 faipl-1.0-sd 및 4th tail의 라이선스를 따릅니다.
(엄밀히 말하면 4th tail은 ponyV6 시리즈 모델이므로 ponyV6 라이선스를 따른다고 해석하고, 이 모델의 Civitai 라이선스 체크박스는 ponyV6를 기준으로 설정했습니다)
또한 이 모델로 인해 발생하는 문제에 대해 저는 책임을 지지 않습니다.
This model follows the licenses of both faipl-1.0-sd and 4th tail.
(Strictly speaking, 4th tail is a model in the ponyV6 series, so I interpreted it as following the ponyV6 license, and the license checkboxes on Civitai for this model are set with ponyV6 as a reference.)
Additionally, we are not responsible for any issues that may arise from the use of this model.


