Leaves and vines(树叶藤蔓衣)

詳細

ファイルをダウンロード

モデル説明

葉のツタ効果の衣装モデルへようこそ。このモデルは、リアル、2D、2.5Dの絵画スタイルに対応した大規模モデルおよびLoRAモデルと互換性があります。

Welcome to this leaf vine effect costume model which is compatible with live, 2d, 2.5d painting style large model models and lora models

-----------------------------------------------------------------------------------------------------

推奨出力パラメータ(Suggest drawing parameters):

推奨SDXLベースモデル(Recommended SDXL base mode:)

Kohaku-XL

StarlightXLAnimated_v3

ArienMixXL Asian portrait

LoRA推奨重み:0.6~0.8

サンプリング方法(Sampler):

DPM++ 3M SDE Exponential     45ステップ

プロンプトガイドance係数 (CFG Scale): 3~7

人物ポートレート解像度(Portrait character resolution): 768x1280、1024x1024

十分な構成であれば、高解像度修復を有効にすることをお勧めします

it is recommended to open HD repair if the direct configuration is enough

高解像度修復(Hires.fix): 4x-UltraSharp、高解像度反復ステップ数 15~30、リペイント強度 0.3~0.5

Clip Skip: 2

(否定的)負のプロンプト:text,username,logo,(low quality, worst quality:1.4),(bad anatomy),(inaccurate limb:1.2),bad composition,inaccurate eyes,extra digit,fewer digits,(extra arms:1.2),watermark,multiple moles,mole on body,head out of frame,

XLバージョン更新(Update)

SDXLバージョンはSD1.5バージョンの問題を最適化しました

SDXLv1バージョンでは、本モデルの低重みで他のモデルの高重み時にツタ・葉の効果をトリガーする条件を変更し、他のLoRAモデルへの影響を可能な限り最小限に抑えました

新バージョンのトリガー語は「vines」に変更され、0.6~0.8の重みで正常にトリガーできます。他のLoRAと組み合わせる際は、他のモデルの衣装の重みを減らすか、本モデルのトリガー語の重みを増やす必要があります。重みが低い場合は、トリガーしたい自然言語の重みを適切に増やす必要があります。不要なLoRAの重みは0.8を超えないでください。また、SD1.5で発生していた身体動作への影響を解決し、身体の動きを自由に制御できるようになりました。SDXLは自然言語の理解に優れているため、トリガー語「vines」を使わずに自然言語だけでトリガー可能です。特殊なケースでは、トリガー語と自然言語を組み合わせて使用できます

例:

A girl with vines wrapped around her chest

a woman in a bodysuit with green leaves on her body and a hat on her head and hands on her head

a woman with green leaves on her body and a body paint job on her body and chest,

a woman with green leaves on her body and a green mask on her head and hands on her hips

a woman with green leaves on her body and a mirror in her hand

a woman with green leaves on her body and arms and legs

a woman with green leaves on her body and body paint on her body and hands and legs

a woman with green leaves on her body and stockings on her legs

その他の自然言語はモデルのメタデータをご確認ください。すべてを列挙していません

SDXLバージョンはSD1.5バージョンの問題を最適化しました。SDXLv1バージョンでは、本モデルの低重みで他のモデルの高重み時にツタ・葉の効果をトリガーする条件を変更し、他のLoRAモデルへの影響を可能な限り最小限に抑えました。新バージョンのトリガー語は「vines」に変更され、0.6~0.8の重みで正常にトリガーできます。他のLoRAと組み合わせる際は、他のモデルの衣装の重みを減らすか、本モデルのトリガー語の重みを増やす必要があります。他のモデルの衣装の重みを減らすには「naked」を使用してください。LoRAの重みが低い場合は、トリガーしたい自然言語の重みを適切に増やす必要があります。不要なLoRAの重みは0.8を超えないでください。また、SD1.5で発生していた身体動作への影響を解決し、身体の動きを自由に制御できるようになりました。SDXLは自然言語の理解に優れているため、トリガー語「vines」を使わずに自然言語だけでトリガー可能です。特殊なケースでは、トリガー語と自然言語を組み合わせて使用できます

A girl with vines wrapped around her chest

a woman in a bodysuit with green leaves on her body and a hat on her head and hands on her head

a woman with green leaves on her body and a body paint job on her body and chest,

a woman with green leaves on her body and a green mask on her head and hands on her hips

a woman with green leaves on her body and a mirror in her hand

a woman with green leaves on her body and arms and legs

a woman with green leaves on her body and body paint on her body and hands and legs

a woman with green leaves on her body and stockings on her legs

その他の自然言語はモデルのメタデータをご確認ください。すべてを列挙していません

-----------------------------------------------------------------------------------------------------

1.1バージョン更新(Update)

  1. 1.1バージョンでは、本モデルを特定のLoRAモデルと組み合わせた場合に発生していたモデル汚染や過学習の問題を最適化しました

  2. 1.1バージョンでは、本モデルの低重みで他のモデルの高重み時にツタ・葉の効果をトリガーする条件を変更し、他のLoRAモデルへの影響を可能な限り最小限に抑えました

  3. 新バージョンのトリガー語は(vines:1.5)に変更され、0.6~0.8の重みで正常にトリガーできます。ただし、重みが低いほど他のLoRAへの影響が小さくなるため、使用時は0.6の重みから段階的に重みを増やすことを推奨します

  4. Version 1.1 optimized this model and combined it with individual Lora models to cause model contamination and overfitting

  5. In version 1.1, the triggering condition has been changed to trigger the vine leaf effect under low weight in this model and high weight in other models, while minimizing the impact on other Lora models

  6. The trigger word in the new version has been changed to (vines: 1.5), which can be triggered normally at a weight of 0.6~0.8. However, the lower the weight, the smaller the impact on other Loras. When using it, gradually increase the weight from 0.6 to 0.8

上記以外のパラメータは前バージョンを継続して使用してください

Continue to use the previous version for other parameters that were not mentioned

-----------------------------------------------------------------------------------------------------

1.1バージョンの使用推奨(1.1 version usage suggestions):

推奨重み(Recommended weight):0.6

新バージョンのトリガー語は(vines:1.5)に変更され、0.6~0.8の重みで正常にトリガーできます。ただし、重みが低いほど他のLoRAへの影響が小さくなるため、使用時は0.6の重みから段階的に重みを増やすことを推奨します

The trigger word in the new version has been changed to (vines: 1.5), which can be triggered normally at a weight of 0.6~0.8. However, the lower the weight, the smaller the impact on other Loras. When using it, gradually increase the weight from 0.6 to 0.8

推奨否定的プロンプト(Negative prompt words are recommended):EasyNegative,(worst quality, low quality:2),monochrome,zombie,(interlocked fingers:1.2),extra limb,mutated hands and fingers,malformed hands,(head out of frame:1.5),headless,floating limbs,

-----------------------------------------------------------------------------------------------------

1.0バージョンの使用推奨(1.0 version usage suggestions):

推奨重み(Recommended weight):0.6~1.0(最適は0.8)重みが低いほど体に現れる葉の量が減ります。重みが高い場合はトリガー語を追加しなくてもデフォルトで動作します。低重みで使用する場合のみトリガー語を追加してください

The recommended model weight is 0.6~1.0. 0.8 is the best. The lower the weight of your model, the less leaf effects it will have. In situations where the weight is high, triggering Lora effects can be added without adding triggering words

トリガー語(Trigger word)vines,leaf,vine underwear,chest entangler vine

推奨否定的プロンプト(Negative prompt words are recommended):EasyNegative,(worst quality, low quality:2),monochrome,zombie,(interlocked fingers:1.2),extra limb,mutated hands and fingers,malformed hands,(head out of frame:1.2),headless,floating limbs,

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  • モデルに関するフィードバックは、内部メッセージでお送りください

画像ソースおよびトレーニングコードはインターネットから取得したものであり、本モデルは学術的な興味のための交流のみを目的としています。著作権侵害の場合は、ご連絡ください。削除いたします。ありがとうございます。

The image source and training code are from the Internet, and the model is only used for scientific interest exchange. If there is infringement, please contact to delete, thank you.

このモデルで生成された画像

画像が見つかりません。