Succupon All in One Anima Workflow T2I - I2I - Detailing - Upscale - Regional Prompting
詳細
ファイルをダウンロード (1)
このバージョンについて
モデル説明
Please take a look at the following article for a full guide on how to use this workflow effectively:
https://civitai.red/articles/29870
Changelog:
v1.0
• Initial release
v1.1
• Adding Regional Prompting!
Please Note: Regional Prompting uses a node that is not available in the standard ComfyUI manager. You must manually install it if you want to use it, which requires some basic git knowledge. https://github.com/Sen-sou/Comfyui-Anima-Regional-Conditioning/tree/main
I highly suggest you give it a try. This node set works great for Anima.
• Changed the Face Detailer model. I found that the model I used in v1.0 tended to get into infinite loops for Anima. See the bottom of this guide for the download link.
Below you will find a quick overview, but I encourage you to take a look at the full guide.
So what makes this workflow special? It is specifically how your detailers work.
A common annoyance I have is if you are generating large batches of images with a generic prompt for your detailers, they will tend to “normalize” the area they are detailing. Example: An image of a character with an angry expression gets sent to a face detailer with “face, beautiful face,” it will slowly morph the face into a neutral of smiling expression with multiple passes.
To combat this problem, this workflow will feed your face and eye detailer prompts into your body prompt, and all three will feed into your base prompt. Here is a quick visualization of what is happening.
Essentially, you input your detailer text and wildcards on one central location. Eye detailer text will feed into your face detailer, your face detailer will feed into your body detailer. And all detailers will feed into your global prompt.
Here is an example base prompt. This is Anima, so you can use natural language in your prompt.
And now I input prompts for the detailers
You will notice I included emotions of the characters in the face detailer. This will get fed into the base prompt but also ensure that the face detailer knows about the expressions.
I also included the names of the characters in the eye detailer. This may seem odd at first but bear with me. I did this because the eye detailer is fed into both the face and body detailer. This ensures every detailer knows what character it is drawling, all the way down to their eyes. (Refer to the diagram at the top)
Note: At the bottom, there is a preview box so you can see what your prompt looks like when it gets sent for initial image generation. This is helpful when you are first starting to use this workflow.
Note about LoRA's
If you want to use the Turbo LoRA to speed up generation (https://civitai.red/models/2560840/anima-turbo-lora), you need to run this workflow with CFG 1, and 8-12 steps.
If you want to generate at resolutions higher than 1024x1024, you can use this LoRA https://civitai.com/models/2540444/anima-highresaesthetic-boost?modelVersionId=2855073
Set your aspect_ratio to custom, and manually enter the size. Setting aspect_ratio to anything other than custom will override your entered values for width and height.
IMG2IMG
Enable the IMG2IMG mode
Load an image and specify a Denoise level. The closer the Denoise is to 1, the more the image will change.
The image will follow the same detailer pipeline and logic as the TXT2IMG one. Detailer prompts will be sent to your initial image prompt, and face/eye detailers will be sent to your body prompt. The results are very consistent and give high prompt adherence.
For this image, I included things like “slit pupils, glowing eyes” in the eye detailer, “evil smile, mischievous, fangs” in the face detailer, and “large breasts” in the body detailer.
Outside of that, I just described the scene through natural language:
night, darkness, candlelight, shadows, moon, dim lighting,
succubus, devil wings, devil tail, horns, succubus outfit, revealing clothes,
Three adult women are sitting on a couch in a living room with a fireplace together. They all have different eye and hair colors. The girl in the center is taller than the other two and her mouth is closed. The two smaller girls are on either side of the taller girl. The two girls have their mouths open revealing fangs.
The denoise was set pretty high since I wanted the image to change quite a bit. You should generally start lower and work your way up (Around 0.5 or 0.6 perhaps)
It’s important to realize that Anima is not an “edit” model. You shouldn’t try to edit an image like Qwen edit. This is simply IMG2IMG.
Regional Prompting
You need to download these nodes outside of ComfyUI! https://github.com/Sen-sou/Comfyui-Anima-Regional-Conditioning
This section allows you to mask an image and apply prompts to only certain sections of the image. It is very fun to play around with. It can give you very consistent characters and high prompt adherence. When you run the workflow for the first time, it will generate a blank canvas that equals the size of your generation
You can stop your generation after this canvas generates.
Right-Click the cavas and select Open in MaskEditor
Now you can use Red, Green, Blue, and Black colors to create your masks. This is just a basic example. You can make any shape you want and get some pretty interesting results.
Enter prompts for each colored regions. (If you only want 2 or 3 regions, just draw them and only fill in those colored prompt boxes). You can use wildcards as well!
In the workflow, you can check out the notes I have left. I have examples for both a "Blended" and a "Stylistic" present.
Here is an example of both:
Blended
Stylistic
The blended preset will more seamlessly integrate your individual prompts into the background where the stylistic present will create clear and distinct separations for your prompted regions.
Custom Nodes
You should be able to install everything that is needed through the ComfyUI manager. But just in case, I will leave a list of nodes:
https://github.com/Comfy-Org/Nvidia_RTX_Nodes_ComfyUI
https://github.com/ltdrdata/ComfyUI-Impact-Pack
https://github.com/pythongosssss/ComfyUI-Custom-Scripts
https://github.com/rgthree/rgthree-comfy
https://github.com/yolain/ComfyUI-Easy-Use
https://github.com/kijai/ComfyUI-KJNodes
https://github.com/ssitu/ComfyUI_UltimateSDUpscale
https://github.com/Suzie1/ComfyUI_Comfyroll_CustomNodes
https://github.com/sipherxyz/comfyui-art-venture
https://github.com/ltdrdata/ComfyUI-Impact-Subpack
https://github.com/ltdrdata/was-node-suite-comfyui
https://github.com/evanspearman/ComfyMath
https://github.com/alexopus/ComfyUI-Image-Saver
https://github.com/Miosp/ComfyUI-FBCNN
https://github.com/Goshe-nite/comfyui-gps-supplements
https://github.com/pamparamm/ComfyUI-ppm
https://github.com/Sen-sou/Comfyui-Anima-Regional-Conditioning
Checkpoints: Use any Anima model you want!
Detailer models
Hand: https://huggingface.co/Bingsu/adetailer/blob/main/hand_yolov8s.pt
Body: https://civitai.com/models/2201851/personfemaledetection
NSFW Detailer: https://civitai.com/models/1313556/anime-nsfw-detectionadetailer-all-in-one
Extra notes for Anima: Take a look at their Huggingface repo. They have plenty of guidance for using their model. https://huggingface.co/circlestone-labs/Anima
Also, If you want to increase the generation speed, feel free to disable detailers. Anima tends to produce better base images than SDXL, Pony, and Illustrious. There are many times where detailing an image is simply not needed. Perhaps try only leaving the Refine and SDSU Upscale steps enabled, with all other detailers disabled.
For all models used in this workflow, as well as in-depth examples on regional prompting, check out the guide article:
https://civitai.red/articles/29870